Key Features

• Ultra-fast Maximum Power Point Tracking (MPPT).
• Advanced Maximum Power Point Detection in case of partial shading conditions.
• Outstanding conversion efficiency.
• Flexible charge algorithm.
• Extensive electronic protection.
• Internal temperature sensor.
• Bluetooth Smart built-in: dongle not needed.
• VE.Direct.
• Remote on-off.
• Programmable relay.
• Optional pluggable LCD display - Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.

SmartSolar Charge Controllers with VE.Can interface

Technical Specifications

• Battery voltage: 250/100 - 12V/24V/48V Auto Select (software tool needed to select 36V).
• Rated charge current: 100A.
• Maximum PV power, 12V: 1450W.
• Maximum PV power, 24V: 2900W.
• Maximum PV power, 48V: 5800W.
• Max. PV short circuit current: 70A.
• Maximum PV open circuit voltage: 250V absolute maximum coldest conditions. 245V start-up and operating maximum.
• Maximum efficiency: 99%.
• Self-consumption: Less than 35mA @ 12V/20mA @ 48V.
• Charge voltage 'absorption': Default setting: 14,4V/28,8V/43,2V/57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth).
• Charge voltage 'float': Default setting - 13,8V/27,6V/41, 4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth).
• Charge algorithm: multi-stage adaptive.
• Temperature compensation: -16 mV / -32 mV / -68 mV / °C.
• Protection: Battery reverse polarity (fuse, not user accessible) / PV reverse polarity / Output short circuit / Over temperature.
• Operating temperature: -30 to +60°C (full rated output up to 40°C).
• Humidity: 95%, non-condensing.
• Data communication port: VE.Direct or Bluetooth.
• Remote on/off: Yes (2 pole connector).
• Programmable relay: DPST; AC rating: 240 VAC / 4 A; DC rating: 4A up to 35VDC, 1A up to 60 VDC.
• Parallel operation: Yes, parallel synchronised operation with VE.Can (max. 25 units) or Bluetooth (max. 10 units).
• Dimensions (TR Version): 216 mm x 295 mm x 103 mm.
• PV terminals 3): 35 mm² / AWG2 (Tr models) - Three pairs of MC4 connectors (MC4 models)
• Battery terminals - 35mm² / AWG2
• Protection category - IP43 (electronic components), IP22 (connection area)
• Weight: 4,5kg
• Dimensions: Tr models: 216H x 295W x 103D (mm)
• Safety: EN/IEC 62109-1, UL 1741, CSA C22.2

SmartSolar Control display - Optional Plug-in Display

The SmartSolar Control display is a dedicated display for the following MPPT solar charger ranges:

• SmartSolar MPPT 150/45 up to 250/100
• SmartSolar MPPT 150/70 up to 250/100 VE.Can
• BlueSolar MPPT 150/70 up to 250/100 VE.Can

The display can be used to monitor the solar charger and to view both live and historic data. The display can also be used to configure solar charger settings.

• PV power, yield, voltage and current.
• Battery voltage, current and charge stage.
• Load output state and current (only available if the solar charger is equipped with a load output).
• 30-day historical values.
• Cumulative historic values over the live of the solar charger.

Specification

• Installation type: Inserts into the display port on the front of a solar charger.
• Suitability: Suitable for the Victron Energy 150V and 250V BlueSolar and SmartSolar MPPT solar charger range that are equipped with a display port.
• Display port connector: RS232 9 pin pinout
• Dimensions (w x l x h): 116mm x 50mm x 25mm
• Weight: 66g