Features

• This battery is compatible with most inverters on the market
• 10-year local manufacturer's warranty
• Support high discharge and charge power
• Batteries can be charged in shorter time due to high charge capability

Specifications

• Weight: 111 kg
• Battery Type: Lithium Ion
• Nominal Energy: 10000 Wh
• Depth of discharge: 90.00 %
• Voltage: 48 V
• Continuous Discharge Rate (Normal Use): 10000 W
• Maximum Discharge Rate (5 Minutes): 15000 W
• Surge Discharge Rate (15 Seconds): 15000 W
• Maximum Charge Rate (5 Minutes): 10000 W

Technical Specifications

• Total Energy Capacity [kWh]: 10.
• Energy, 80% DoD [kWh]: 8.
• Current Capacity [Ah]: 200.
• Max/Cont. Current [A]: 200.
• Max/Cont. Discharge Current [A]: 300/200
• Max/Cont. Discharge Power [kW]: 15/10
• Nominal Voltage [V]: 52V, to suit 48V Inverters, min 47V, max 56V
• Max Recommended Inverter Total Rated Power (cont.) [kVA]: 10.
• Short Circuit Current [kA]: 8
• Battery Weight [kg]: 108.
• Battery Dimensions (HxWxD(wall)[mm]): 745 mm x 340 mm x 290 mm.
• DC Connection - Fly Leads (no. per electrode) [mm²]: 1x50mm² Permopower
• Enclosure - Aluminium enclosure painted white, for use indoors or fully protected under-cover environments, rated to IP20
• Protection: SShunt Trip Circuit Breaker sized to suit max current, can be tripped by BMS if critical fault, manual reset. Includes overcurrent, cell under and over voltage, temperature, weak cell detection, minimum SoC control.
• Control Interface: USB Serial protocol for troubleshooting & RJ45 for BMS & inverter communication
• Human Interface: State of Charge display (0 to 100%), Error light, Error Reset button, USB plug for programming
• Warranty: Standard Warranty: 10 years (or 6000 cycles) 80% DoD, 0.5C Max Discharge, 0.25C Max Charge, Max 25°C
• Service Life 5 >16 years (>5500 cycles) expected life at 80% DoD 1 >20 years (>7500 cycles) at 50% DoD
• Essential Accessories: Note that for connecting the battery to a PC a USB "printer" cable is required (one is supplied with each battery), CAN Bus Termination Resistor - one required per battery (one included with battery), CAN Bus cable (RJ45 LAN cable) - one required per battery (not supplied with battery). Note some inverters will require a special (non-standard pin configuration) cable - see installation manual.